IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields

Project description:

IEC 61000 Part 4- 6 is an immunity test requirement for conducted disturbances, induced by radio-frequency fields.

The test levels are as shown in the Figure below.

← IEC 61000-4-8:2010 Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test

IEC 61000-4-5:2014 Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test →

Archives

March 2021
January 2021

RF EMC CENTRE MALAYSIA SDN BHD 202001043217 (1399538X)

Address: Jalan Bravo 4/3, Block F4, Universiti Tun Hussein Onn Malaysia, Jalan Kluang, Parit Raja, Batu Pahat, 86400, Johor, Malaysia

Phone: +6010 8888 341

Email: sales@emcmalaysia.com

Map direction

Disclaimer

The views and opinions expressed on this website are those of the authors and do not necessarily reflect the official policy or position of any other agency, organization, employer, or company. Assumptions made in the analysis are not reflective of the position of any entity other than the author(s) and since we are critically-thinking human beings, these views are always subject to change, revised, and rethink at any time. Please do not hold us to them in perpetuity.

We do not make any warranties about the completeness, reliability, and accuracy of this information. Any action you take upon the information on this website is strictly at your own risk, and we will not be liable for any losses and damage in connection with the use of our website.